Anti static vacuum
Anti-static vacuum PDF Print E-mail
Written by Robert Whittle   
Wednesday, 17 September 2008 00:45

Vacteck designs and manufacturers a wide range of anti static pneumatic vacuums. These systems are intrinsically safe in explosive and hazardous environments as they are powered by air and there is no ignition source, no moving parts and no heating component. Vacteck's anti static vacuums come in both wet and dry models.

Read what a trained consultant says about Vacteck's range of anti static vacuums;

 anti-static vacuum system. Non static vacuum. Pneumatic anti-static vacuum.

The above apparatus is intended to remove combustible and flammable liquids
(and other matter) by means of a vacuum applied to the reservoir (2), created by
the air motor and pump assembly (3), and collected by the metal wand (6).

anti-static vacuum system. Non static vacuum. Pneumatic anti-static vacuum.

POTENTIAL ELECTRICAL IGNITION SOURCES – THIS APPARATUS
The apparatus above contains no electrical sources of ignition and is bonded
to the system earth in order to prevent any build up of static electricity, therefore
preventing ignition by electrostatic sparking.
POTENTIAL MECHANICAL IGNITION SOURCES – THIS APPARATUS
From the manufacturer’s statement, there are no moving parts in either the motor
or pump assembly that can produce heat from friction. The particulars of this
device are subject to an application for a Patent and may not be discussed
further.
Therefore no heat generating mechanical components exist within the apparatus,
based on an affirmation from the manufacturer and designer of the air motor and
pump assembly.

anti-static vacuum system. Non static vacuum. Pneumatic anti-static vacuum.

This apparatus, by its nature and design, is inherently and unconditionally safe in
a constantly hazardous explosive or combustible atmosphere as there are no
ignition sources or mechanisms for ignition incorporated within it, under normal
operation.
Certification under any national or international explosion protection scheme,
including ATEX Approval or IECEx Certification or to any explosion protection
standards is therefore unnecessary as this apparatus is outside of the scope of
these schemes and those standards

anti-static vacuum system. Non static vacuum. Pneumatic anti-static vacuum.

Based on the above analysis and the supplied data by both Vacteck and the
manufacturers of the air motor and pump, it is the opinion of E.P.E.E. Consulting
Services that the apparatus as described above of this Letter of Opinion is
inherently and unconditionally safe in explosive, flammable or combustible
atmospheres in that it will not ignite explosive mixtures of flammable gases,
vapours or mists, combustible mists or combustible dusts, during normal
operation.

Read More

Paul Spresser
Principal Consultant
E.P.E.E. Consulting Services Pty Ltd

Bachelor Engineering (Electrical and Computers) - QUT 1992
Associate Diploma Electrical Engineering – DDIAE 1986
Electrical Equipment in Hazardous Areas (EEHA) Auditor No. 02/0093 Category 3 (Gas, Vapours and Combustible Dusts) (DEIR/ESO
Queensland)
Member – Engineers Australia
Member – Standards Australia EL-014, EL-023 and MS-011 subcommittees
Past Member – IECEx Assessment Team

 

Last Updated on Wednesday, 17 December 2008 00:54
 
We have 2 guests online

Vehicle mounted - Vac N Sack

Vack N Sack - Roof Insulation vacuum

Hopper Vac auto

contact us

Drum Vac with silencer

Pneumatic vacuum - 20 cfm

Fly Ash vacuum

Spill vacuum

Vacuum loading