The TT20RAB is a low air high suction vacuum unit. Fitted with reverse air blast filter cleaning and with the ability to upgrade to anti-static features this system is a must for all small factories that need a reliable vacuum cleaner that consumes a low quantity of compressed air. The TT20RAB can be fitted to either a 60 litre or 205 litre galvanised drum lid. And wait... there's more. No it's not a steak knife......it's a transfer hose that turns this unit into a wet vacuum. Don't get your dry drum wet, just add the transfer hose to any old steel drum and your TT20RAB becomes a high powered wet vacuum as well. Incredible.
Watch the video below.
Â
Â
The high powered TT20RAB is seen in the above image recovering corn and seeds. The system is set with 4 metres of anti-static hose and powered by a small 20 cfm compressor. The air hose has been extended to 25 feet. This will cause a reduction in volume and pressure. The TT20RAB still performs well recovering all seed and grains presented to it.
Even though it is powered by a small 20 cfm compressor the pick up of the grain and seeds is fast and clean.
Â
 After any cleaning session turn off the vacuum with the blue control valve and then turn on the red control valve to activate the RAB filter cleaning.
Â
Now the TT has a trick up its sleeve. The Transfer hose. A cheap addition to the TT system. This transfer hose attaches to the TT dry unit and then to either a 60 litre or 205 litre drum. It transfers the power into the other capture drum. It incorporates a shut-off valve so it can now recover fluids. None of the the fluid goes into the TT dry unit. It is all contained in the capture tank.
Wet vacuuming up spills is as easy as turning on the ball valve. High powered spill control.
